The mechanical seal for TD200 and above is cartridge mechanical seal.Motor needn't to be disassembled when replace mechanical seal.

TD125~TD150 products have two structures, one is easy maintenance structure, using a catridge mechanical seal.And another is expantion shaft structure.

The Vertical Inline Pumps pumped liquidis clean, thin,non-corrosive, non-flammable, andnon-explosive liquid whichshall not contain any solid grain and fibre that might damage the pump mechanicallyor chemically.

• ​

Liquid temperature:-15 degree ~110 degree

1.  lf the system pipeline can support the pumps, pumps with 2.2kW motor power(including 2.2kW)can be hung in line, if the system pipeline cannot support the pumps or the pump motor power is higherthan 2.2kW, the pumps must be installed in brackets or base.
2. Pumps with motor power lower than 2.2kW(including 2.2kW) can be installed horizontally orvertically to the pipeline. Pumps with motor power higher than 2.2kW, can only be installed verticallyto the pipeline(see 2-A).
4. The pump should be installed in the environment with sufficient cooling and the cooling airshall not be above 40 degree .
6. For the convenience ofmaintenance, there should be enough space above and below the pumpsMinimum 300mm shall be kept for pumps with motor power lower than 5.5kW, and minimum 1000mmfor pumps with motor power higher than 5.5kW (including 5.5kW). (See 2-B)7, To prevent noises and vibration and ensure the best operation, anti-vibration base shall beused in installation. Generally, cement base with the weight equal or bigger than l.5x pump weightshall be adopted.(See 2-C).

50HZ

תגיות פופולריות: